高效生产移液头，还得看德马格电动机系列！

Pipette tips are disposable plastic cones, designed to fit on pipettes, to transfer a precise volume of liquid. 

移液头是一次性塑料锥体，安装在移液器上，以转移精确容量的液体。

•Differentsizes : from 10 μL (∅ ~3mm * ~30mm) to 1500 μL (∅ ~10mm * ~100mm)

•Lightweight: Between 0,1g and 1g

•Wall thickness in general 0.3mm

•尺寸：从10μL（∅~3mm*~30mm）到1500μL（∅~10mm*~100mm）

•重量：0.1g至1g之间

•壁厚一般为0.3mm

Machine technology related/机器技术相关

01

Typical mould sizes (200µl tip)

16cav – IntElect2 S 100 – cycle times 4s+

32cav – IntElect2 S 130 – cycle times 4s+

64cav – IntElect2 S 180 – cycle time 4s+

128cav – El-Exis SP 300 – cycle time 4s+

Injection unit depending on pipette tip design.

Average screw size 45mm with L/D 20 (200µl & 64cav.).

典型模具尺寸(200µl 尖头)

16腔 – IntElect2 S 100 – 循环时间 4s+

32腔 – IntElect2 S 130 – 循环时间 4s+

64腔 – IntElect2 S 180 – 循环时间 4s+

128腔 – El-Exis SP 300 – 循环时间 4s+

注射单元取决于移液头的设计。

平均螺杆尺寸 45mm，长径比 20 (200µl & 64cav.)。

02

Direct drive technology

•Stroke normally low (0.3 to 1D) 

•Fast acceleration à Fast injection à No stress to the material •Low runout tolerance in all cavities 

•Fast cycle time

直驱技术

•行程通常较短 (0.3 to 1D) 

•快速加速＞快速注射＞ 材料无应力 

•所有型腔的公差跳动小 

•快速循环时间

03

Energy consumption [kW/h]

Typical application for 64cav.tips :

•180t, SC 40mm 

•Shot weight 16g 

•Cycle 5 sec

能耗 [kW/h]

64腔移液头的典型应用:

•180t, SC 40mm 

•注射重量16克 

•周期 5s

IntElect 2 is also up to 80% more efficient than hydraulic machines for pipette tips !/IntElect 2生产移液头的效率比液压机高出 80%！

04

Machine layout/机器布局

Our advantages-Services and Comzzpetences/我们的优势——服务与能力

Risk reduction for our customers

为客户降低风险

•Selection of partners to support complex applications (Production cells) 

•Setup of Traceability Matrix / Change log 

•Ergocheck (Calibration of the machine) 

•Extended support during FAT/SAT with GMP trained personnel

•选择合作伙伴以支持复杂的应用（生产单元） 

•建立可追溯性矩阵/更改日志 

•Ergocheck（机器校准）

•在 FAT/SAT 期间由经过 GMP 培训的人员提供扩展支持